Decoration & Production Specs
A production-planning reference built from verified product data. Exact decoration dimensions are shown only when a supplier-verified source is available.
Port Authority Latitude Waterproof Heavyweight Parka J363
100% polyester shell and lining 8 000MM fabric waterproof rating 5 000G/M2 fabric breathability rating Attached adjustable hood with concealed locking drawcord Full-length exterior storm flap Interior zippered chest pocket Reverse coil two-way center front zipper Adjustable tabs at cuffs Adjustable locking drawcord at waist Port Pocket for decoration access Angled welted upper zippered pockets Lower flap-and-snap dual-entry patch pockets with zippered side pockets Insulation method: 8.6-oz. polyfill in body; 6.8-oz. polyfill in body hood and sleeves Water protection method: TPU laminate…
- Available sizes
- XS · S · M · L · XL · 2XL · 3XL · 4XL
Data Readiness
Green means the information is present for this exact product. Amber means EXOTIC intentionally leaves it unfilled rather than estimating.
Product image is available for this style.
8 ordering sizes are available.
Exact garment measurements are shown only from verified source data.
Placement dimensions are shown only when verified for this style.
Front & Back Garment Views
Actual product imagery is used when the media is clearly identified. A vector reference is used instead of falsely labeling an unidentified image as the back.
Common Placement Zones
These are planning zones, not approved maximum print dimensions. Exact usable area changes with garment size, seams, construction, and equipment.
Verified Decoration Dimensions
Only style-specific verified dimensions belong in this table.
We intentionally do not publish generic “12 × 14” style limits as if they were approved. Confirm the physical garment, artwork, platen or hoop, and final position before production.
Decoration Method Planning
Method compatibility depends on fabric composition, garment weight, coatings, stretch, seams, and production equipment.
Screen Printing
Review ink system, mesh, underbase, cure temperature, and seam or collar interference. Test print when fabric or color behavior is uncertain.
DTG / DTF
Confirm pretreatment or film/adhesive compatibility, press temperature, color migration risk, and wash-performance expectations.
Heat Transfer
Verify fabric heat tolerance, dwell time, pressure, transfer type, and any dye-migration or scorch risk before pressing production units.
Embroidery
Check fabric stability, backing, hoop access, stitch density, seam clearance, and garment weight. Produce a sample for dense or large designs.
Production Preflight Checklist
A professional decoration plan confirms the garment, artwork, equipment, and production variables before the order runs.